Mountain Bike Seat – Gel Padded MTB Saddle with Centre Cut Out for Road and Trail

Padded Where You Sit. Open Down the Middle. Narrow Where You Pedal.

Twenty minutes into the fire trail, the stock mountain bike seat stops feeling like a seat. It's a hard, flat plank, and every root, rock and corrugation on the way down comes straight up through it. By the time you roll back into the car park, you've spent more of the ride standing on the pedals than sitting down.

Summer makes it worse. At three in the afternoon a solid saddle holds the heat right where you sit, and a wide, square nose rubs the inside of your thighs on every single pedal stroke.

This bike seat fixes the three things a stock saddle gets wrong.

Here's How It Works

The top is padded with gel and memory foam over a shaped shell. Instead of a flat board you get a cushioned surface that gives a little under your sit bones, so the chatter from gravel, roots and washboard is softened before it reaches you. On a long ride, that is the difference between sitting down and hovering.

A cut-out runs the length of the centre, open right through the saddle. It takes pressure off the middle of the seat, where a solid saddle pushes back hardest, and it gives air a way through instead of trapping heat under you on a hot day.

Up front, the nose narrows sharply. Your thighs pass it cleanly on every pedal stroke, so nothing rubs on the inner leg, and sliding forward for a steep pinch climb is easy.

Underneath, standard twin rails clamp into the seat post of most mountain, road and touring bikes, so it goes on where your current saddle comes off. The wear-resistant PU cover has a non-slip finish that keeps you planted, and a quick wipe takes the dust off after a dirt track.

The Gear It Replaces

• The stock flat saddle — a hard plank that sends every bump straight up
• An old saddle with tired padding — foam that flattened out years ago and gives nothing back
• A solid saddle with no channel — heat and pressure in the same spot for the whole ride
• Standing on the pedals — the workaround that turns every descent into a leg session

What's In It

• Gel and memory foam padding — a softer surface under your sit bones on long rides
• Full-length centre cut-out — pressure off the centre line and air moving through
• Narrow nose — thighs clear on every pedal stroke, no rubbing on the inner leg
• Sport saddle shape — wider at the back for support, tapered at the front for movement
• Wear-resistant PU cover — a non-slip finish that holds you in place on rough ground
• Standard twin rails — clamp into most standard seat posts on MTB, road and touring bikes
• Three trim colours — black with red, blue or yellow to suit your bike

Specifications

• Product type: Bicycle saddle (bike seat)
• Padding: Gel and memory foam
• Cover: PU synthetic leather with a non-slip finish
• Materials: Polyurethane, synthetic leather, plastic and foam
• Design: Full-length centre cut-out, narrow nose
• Mounting: Twin rails for standard seat posts
• Dimensions: 27.5 x 14.5 x 7 cm (L x W x H)
• Colours: Black Red, Black Blue, Black Yellow
• Intended use: Mountain biking, road cycling, touring and commuting
• Intended user: Adult riders, men and women

Soft seat. Cool ride. Free legs.

We offer free shipping Australia-wide Check our Shipping Policy for more information.

If you decide to return the items for whatever reason you may do so within 30 days from the day that you received them. Read more in our Return and Refund Policy.